Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Display item | Display | Condition | Note |
|---|---|---|---|
| HF TYPE | BT | - | Indicates state of configuration result.
NOTE:
This item is displayed, but not used. |
| AUDIO UNIT TYPE | NAVI | - | |
| CALL SWITCH TYPE | SOS | - | |
| SPEAKER TYPE | INDRCT | - | |
| ZONE | USA/CAN | - | |
| CHANNEL | INFINITI 2 | - | |
| CAN COMM | GEN.3 | - | |
| AV COMM | ENABLE/DISABLE | - | |
| K-LINE | ENABLE/DISABLE | - | |
| VEHICLE TYPE | ENG | - | |
| ECHO CANCEL | TYPE 1 | - | This item is displayed, but cannot be monitored. |
| TYPE 2 | |||
| TYPE 3 | |||
| TYPE 4 | |||
| NOISE CANCEL | TYPE 1 | - | This item is displayed, but cannot be monitored. |
| TYPE 2 | |||
| TYPE 3 | |||
| TYPE 4 | |||
| TCU STANDBY TIME | 14DAYS | Set at 14 days (default) | Set value for continued operation time to control battery consumption |
| 2DAYS | Set at 2 days | ||
| 30DAYS | Set at 30 days | ||
| NON | No setting | ||
| SENSOR ANGLE X | - | - | Indicates state of configuration result.
NOTE:
This item is displayed, but not used. |
| SENSOR ANGLE Y | - | - | |
| SENSOR ANGLE Z | - | - | |
| SVTB | - | - | |
| REMOTE DOOR LOCK | ENABLE/DISABLE | - | |
| REMOTE HORN & LAMP | ENABLE/DISABLE | - | |
| REMOTE START | ENABLE/DISABLE | - | |
| NAD OUTPUT STATUS | On | When TCU activation is ON | NAD: Abbreviation of Network Access Device. ON/OFF setting of radio wave |
| Off | When TCU activation is OFF | ||
| ACN COMM SEQUENCE LOG | - | - | - |
| SOS COMM SEQUENCE LOG | - | - | - |