Work Procedure
- SAVING VEHICLE SPECIFICATION
WITH CONSULT
Perform "READ CONFIGURATION" to save or print current vehicle specification.
Is vehicle specification saved normally?
YES
GO TO STEP 2 .
NO
GO TO STEP 4 .
- REPLACE ADAS CONTROL UNIT
Replace ADAS control unit. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
WITH CONSULT
Perform "WRITE CONFIGURATION - Config file" to write vehicle specification.
GO TO STEP 6 .
- REPLACE ADAS CONTROL UNIT
Replace ADAS control unit. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 5 .
- WRITING VEHICLE SPECIFICATION
WITH CONSULT
Select "WRITE CONFIGURATION - Manual selection" and write in the following list at a ADAS control unit depending on a vehicle specification.
Setting item Items Setting value POWER TRAIN NISSAN NISSAN HEV 2WD/4WD 2WD 4WD CAMERA CONTROL UNIT WITHOUT WITH BRAKE TYPENOTE NORMAL SPORT NOTE:- NORMAL: Front brake caliper 2 piston type
- SPORT: Front brake caliper 4 piston type
GO TO STEP 6 .
- OPERATION CHECK
Confirm that each function controlled by ADAS control unit operates normally.
WORK END