September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" is previously conducted, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

: GO TO 2.
CHECK DTC DETECTION
With CONSULT
1. Start the engine.
2. Run engine for at least 2 consecutive seconds at idle speed.
3. Perform "SELF DIAGNOSTIC RESULTS " in "E-SUS".
  Is "U1000" detected?
  
  YES: Go to "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END