Work Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1
- Turn ignition switch ON.
- Operate power window switch to fully open the window.
- Hold the window up switch UP until it completely closes. After the glass stops at fully closed position, keep pulling the switch for 2 seconds or more.
- Check that AUTO-UP function operates normally.
GO TO STEP 2 .
- STEP 2
Check anti-pinch function. Refer to WORK PROCEDURE .
Inspection End.