LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> JX35 AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Removal And Installation >> EVAP Control System Pressure Sensor >> Removal and Installation >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation: Removal

  1. Disconnect EVAP canister purge hose from EVAP canister.
  2. Disconnect EVAP control system pressure sensor.
  3. Remove EVAP control system pressure sensor and O-ring.
    CAUTION: Discard the O-ring. Do not reuse O-ring.
scientia non olet · About LEMON Manuals