Remote Engine Start Function

When the lock button and then the remote engine start button of the Intelligent Key are pressed within 5 seconds of each other, a start signal is transmitted from Intelligent Key to BCM via remote keyless entry receiver.
When the BCM receives the remote engine start signal, it locks all doors and the fuel lid, flashes the hazard lamps and chirps the horn and the engine will then start.
To exit the remote engine start mode from inside the vehicle, depress the brake pedal and press the push button ignition switch at the same time.
To cancel the remote engine start mode away from the vehicle, press the remote engine start button on the Intelligent Key.

Once the vehicle has been started using the remote engine start feature it will remain running for 10 minutes. Extended run time can be added to the initial 10 minute running time by pressing the lock button and remote engine start button within 5 seconds of each other. This will add an additional 10 minutes of running time. Extended time can only be added once, for a total run time of up to 20 minutes.

Remote engine start cancel operation

Anti-theft alarm - unauthorized entry
Maximum time for engine to run by remote start has been exceeded.
Hazard lamps are turned on.
Push button start button is pressed without the Intelligent Key in the vehicle.
Push button start button is pressed without depressing the brake pedal.
The hood is opened while the remote engine start is engaged.