Component Inspection
- CHECK VVEL ACTUATOR MOTOR RELAY
- Turn ignition switch OFF.
- Remove VVEL actuator motor relay. Refer to "COMPONENT PARTS LOCATION ".
- Check the continuity between VVEL actuator motor relay terminals under the following conditions.
Terminal Condition Continuity 3 and 5 12 V direct current supply between terminals 1 and 2 Existed No current supply Not existed Courtesy of NISSAN NORTH AMERICA, INC.
Is the inspection result normal?
YES: INSPECTION END
NO: Replace VVEL actuator motor relay. Refer to "COMPONENT PARTS LOCATION ".