Manual Function

Description

• Automatic drive positioner control unit controls door mirror.
• Automatic drive positioner control unit inputs changeover switch signal and perform the LH/RH control of door mirror motor supplying electric power when changeover switch is operated.
• Automatic drive positioner control unit inputs mirror switch signal and supplies electric power to door mirror.
• The ignition switch signal (ACC/ON) is transmitted from BCM to driver seat control unit via CAN communication and from driver seat control unit to automatic drive positioner control unit via UART communication.

Operation Conditions

If the following conditions are not satisfied, operation is not performed:

• Ignition switch: ON or ACC
• Changeover switch: Select either left or right