Configuration (Can Gateway): Description
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
Vehicle specification needs to be written with CONSULT because it is not written after replacing CAN gateway. Configuration has three functions as follows
| Function | Description | |
|---|---|---|
| Read/Write Configuration | Before Replace ECU |
|
| After Replace ECU | Writes the vehicle configuration with saved data. | |
| Manual Configuration | Writes the vehicle configuration with manual selection. | |
CAUTION:
Follow the instructions listed below. Failure to do this may cause malfunctions to the CAN gateway.:
- When replacing CAN gateway, you must perform "Read/Write Configuration" or "Manual Configuration" with CONSULT.
- Complete the procedure of "Read/Write Configuration" or "Manual Configuration" in order.
- If you set incorrect "Read/Write Configuration" or "Manual Configuration", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- Never perform "Read/Write Configuration" or "Manual Configuration" except for new CAN gateway.