September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

: GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
◦ With CONSULT
1. Turn ignition switch ON and wait at least 5 seconds.
2. Perform self-diagnosis.
3. Check DTC.
  Is DTC detected?
  
  YES: Proceed to "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END