Inspection After Installation
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
After installing DC/DC-J/B, measure resistance between DC/DC-J/B (aluminum part) and body (ground bolt) and check equipotential.
WARNING:
To prevent shock hazards, be sure to put on insulating protective gear before beginning work on the high voltage system.
Between DC/DC-J/B - Body ground: 0.1 Ω or less
If result deviates from standard values, check that no paint, oil, dirt, or other substance is adhering to bolts or conductive mounting parts. If any such substance is adhering, clean the surrounding area and remove the substance.