Physical Values

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

PHYSICAL VALUES

Terminal No. (Wire color)		Description		Condition		Value (Approx.)
+	-	Signal name	Input/Output	Condition		Value (Approx.)
2 (R)	Ground	Cancel switch signal	Input	Ignition switch ON	Turns ON while pressing sonar cancel switch ON.	0 V
2 (R)	Ground	Cancel switch signal	Input	Ignition switch ON	Other than while pressing sonar cancel switch ON.	12.0 V
3 (R)	12 (B)	Corner sensor signal front LH	Input	Ignition switch ON	Other than shift position in P position.	Courtesy of NISSAN MOTOR CO., U.S.A.
4 (W)	12 (B)	Corner sensor signal front RH	Input	Ignition switch ON	Other than shift position in P position.	Courtesy of NISSAN MOTOR CO., U.S.A.
5 (W)	12 (B)	Corner sensor signal rear LH	Input	Ignition switch ON	Shift position in R position.	Courtesy of NISSAN MOTOR CO., U.S.A.
6 (L)	12 (B)	Corner sensor signal rear RH	Input	Ignition switch ON	Selector lever in R position.	Courtesy of NISSAN MOTOR CO., U.S.A.
7 (G)	12 (B)	Center sensor signal rear LH	Input	Ignition switch ON	Selector lever in R position.	Courtesy of NISSAN MOTOR CO., U.S.A.
8 (Y)	12 (B)	Center sensor signal rear RH	Input	Ignition switch ON	Selector lever in R position.	Courtesy of NISSAN MOTOR CO., U.S.A.
11 (W)	Ground	LED signal	Output	Ignition switch ON	Sonar system ON	12.0 V
11 (W)	Ground	LED signal	Output	Ignition switch ON	Sonar system OFF	0 V
12 (B)	Ground	Sensor ground	-	Ignition switch ON	-	0 V
13 (V)	Ground	Ignition power supply	Input	Ignition switch ON	-	12.0 V
15 (G)	Ground	Vehicle speed signal (8-pulse)	Input	Ignition switch ON	When vehicle speed is approx. 40 km/h (25 MPH).	Courtesy of NISSAN MOTOR CO., U.S.A.
16 (BR)	Ground	P range signal	Input	Ignition switch ON	Shift position in P position.	0 V
16 (BR)	Ground	P range signal	Input	Ignition switch ON	Other than shift position in P position.	12.0 V
17 (BR)	Ground	Reverse range	Input	Ignition switch ON	Shift position in R position.	12.0 V
17 (BR)	Ground	Reverse range	Input	Ignition switch ON	Other than shift position in R position.	0 V
18 (O)	-	K-line (CONSULT-III)	-	-	-	-
23 (GR)	Ground	Buzzer drive signal	Output	Ignition switch ON	When buzzer operation	NOTE: Waveform period changes due to the distance to an obstacle. Courtesy of NISSAN MOTOR CO., U.S.A.
24 (B)	Ground	Ground	-	Ignition switch ON	-	0 V