Intelligent Cruise Control System (ICC)
- Basic Inspection
- Diagnosis And Repair Work Flow
- Inspection And Adjustment
- Additional Service When Replacing Control Unit (ICC Sensor Integrated Unit)
- Laser Beam Aiming Adjustment
- Action Test
- System Description
- DTC/Circuit Diagnosis
- DTC C1A00: Control Unit
- DTC C1A01, C1A02: Power Supply Circuit 1, Power Supply Circuit 2
- DTC C1A03: Vehicle Speed Sensor
- DTC C1A04: Abs/TCS/VDC System
- DTC C1A05: Brake SW/Stop Lamp SW
- DTC C1A06: Operation SW
- DTC C1A08: Pressure Sensor
- DTC C1A09: Booster Solenoid
- DTC C1A10: Release Switch
- DTC C1A11: Pressure Control
- DTC C1A12: Laser Beam Off Center
- DTC C1A13: Stop Lamp Relay
- DTC C1A14: ECM
- DTC C1A15: Gear Position
- DTC C1A16: Radar Stain
- DTC C1A18: Laser Aiming INCMP
- DTC C1A21: Unit High Temp
- DTC C1A22: BCU Circuit
- DTC C1A24: NP Range
- DTC C1A28, C1A29: BCU Power Supply Circuit, BCU Power Supply Circuit2
- DTC C1A30: BCU Can Comm CIRC
- DTC C1A31: BCU Internal MALF
- DTC C1A32: IBA Flag Stuck
- DTC C1A33: Can Transmission Error
- DTC C1A34: Command Error
- DTC C1A39: Steering Angle Sensor
- DTC C1A40: System Switch Circuit
- DTC U0121: VDC Can 2
- DTC U0126: STRG Sen Can 1
- DTC U0129: BCU Can 2
- DTC U0401: ECM Can 1
- DTC U0402: TCM Can 1
- DTC U0415: VDC Can 1
- DTC U0418: BCU Can 1
- DTC U0428: STRG Sen Can 2
- DTC U1000: Can Comm Circuit
- DTC U1010: Control Unit (Can)
- Power Supply And Ground Circuit
- ICC Warning Chime Circuit
- Ecu Diagnosis Information
- Symptom Diagnosis
- Intelligent Cruise Control (Full Speed Range) System Symptoms
- Main Switch Does Not Turn On, Main Switch Does Not Turn Off
- ICC System Cannot Be Set (Main Switch Turns On/Off)
- ICC Steering Switch (Other Than Main Switch) Does Not Function
- ICC System Does Not Cancel When A/T Selector Lever Sets On "N"
- Chime Does Not Sound
- Driving Force Is Hunting
- Frequently Cannot Detect The Vehicle Ahead/Detection Zone Is Short
- The System Does Not Detect The Vehicle Ahead At All
- Normal Operating Condition
- Precaution
- Preparation
- Removal And Installation