Component Function Check
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FRONT WIPER STOP POSITION SIGNAL
CONSULT DATA MONITOR
- Select "WIP AUTO STOP" of IPDM E/R data monitor item.
- Operate the front wiper.
- With the front wiper operation, check the monitor status.
Monitor item Condition Monitor status WIP AUTO STOP Front wiper motor Stop position STOP P Except stop position ACT P Is the status of item normal?
YES: Front wiper stop position signal circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".