CONSULT-III Function: Notes
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT-III performs the following functions via CAN communication with A/C auto amp.
DIAGNOSTIC MODE
| Diagnostic mode | Description |
|---|---|
| Self diagnostic result | Displays the diagnosis results judged by A/C auto amp. |
| Data monitor | Displays the input/output signal of A/C auto amp. |
| Active test | The signals used to activate each device are forcibly supplied from A/C auto amp. |
| Work support | Changes the setting for each setting function. |
| ECU identification | Displays the part number of A/C auto amp. |
NOTE:
Diagnosis should be performed with engine running. Door motor operation speeds become slower and NO results may be returned even for normal operation if battery voltage drops below 12 V during self-diagnosis.