General Specifications
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
| Applied model | 2WD | ||
| VQ37VHR | VK56VD | ||
| A/T | |||
| Propeller shaft model | 3S80A-R | ||
| Number of joints | 3 | ||
| Type of journal bearings (Non-disassembly type) | 1st joint | Shell type | |
| 2nd joint | Shell type | ||
| 3rd joint | Rubber coupling type | ||
| Coupling method with transmission | Sleeve type | ||
| Coupling method with rear final drive | Rubber coupling type | ||
| Shaft length | 1st (Spider to spider) | 774 mm (30.47 in) | 724 mm (28.50 in) |
| 2nd (Spider to rubber coupling center) | 745 mm (29.33 in) | ||
| Shaft outer diameter | 1st | 75.0 mm (2.953 in) | |
| 2nd | 65.0 mm (2.559 in) | ||