LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Front Axle) >> Service Information >> Preparation >> Special Service Tool
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Special Service Tool

WARNING: This page is about a different car, the 2010 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOL REFERENCE

Tool number
(Kent-Moore No.)
Tool name		 Description
HT72520000
(J-25730-A)
Ball joint remover
G04902049Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing tie-rod outer end
KV40107300
(-)
Boot band crimping tool
G04901989Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing boot bands
KV38105500
(J-33904)
Differential side oil seal protector
G04899074Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing drive shaft LH
  1. 40 mm (1.57 in) dia. 
KV38106700
(J-34296)
Differential side oil seal protector
G04899074Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing drive shaft RH
  1. 36 mm (1.42 in) dia. 
scientia non olet · About LEMON Manuals