LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Warning Chime System >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Component Function Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Function Check

  1. CHECK OPERATION OF METER BUZZER
    1. Select "BUZZER" of "BCM" on CONSULT-III.
    2. Perform "LIGHT WARN ALM" of "ACTIVE TEST".

    Does meter buzzer beep? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL

    Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value.

    BUZZER

    Under the condition of buzzer input : On

    Except above : Off

    Is the inspection result normal? 

    YES: Replace combination meter.

    NO: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals