LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Driver Information System) >> Warning Chime >> Meter Buzzer Circuit Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Meter Buzzer Circuit Inspection

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BATTERY POWER SUPPLY OF COMBINATION METER 

    Check battery power supply of combination meter. Refer to "POWER SUPPLY AND GROUND CIRCUIT INSPECTION ".

    OK or NG 

    OK: GO TO 2.

    NG: Repair battery power supply circuit of combination meter.

  2. CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL 
    1. Select "METER A/C AMP" on CONSULT-III.
    2. With "DATA MONITOR", confirm "BUZZER" under the condition of buzzer input. (Seat belt warning chime, turn signal lamp operate, etc.)

      "BUZZER" Under the condition of buzzer input : ON 

      Except above : OFF 

    OK or NG 

    OK: GO TO  3.

    NG: Replace BCM. Refer to "REMOVAL AND INSTALLATION OF BCM ".

  3. REPLACE COMBINATION METER 

    Replace combination meter.

    Does meter buzzer beep? 

    Yes: INSPECTION END

    No: Replace unified meter and A/C map.

scientia non olet · About LEMON Manuals