LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine Control System - DTCS P1550 To P2A03) >> DTC P2135 TP Sensor >> CONSULT-III Reference Value in Data Monitor Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

CONSULT-III Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2010 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

DATA MONITOR MODE CHART

MONITOR ITEM CONDITION SPECIFICATION
TP SEN 1-B1
TP SEN 2-B1(1)
  • Ignition switch: ON

    (Engine stopped)

  • Selector lever position: D
 Accelerator pedal: Fully released More than 0.36V
Accelerator pedal: Fully depressed Less than 4.75V
(1) Throttle position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminal voltage signal.
scientia non olet · About LEMON Manuals