LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine Control System - DTCS P1550 To P2A03) >> DTC P2127, P2128 App Sensor >> CONSULT-III Reference Value in Data Monitor Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

CONSULT-III Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2010 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

DATA MONITOR MODE CHART

MONITOR ITEM CONDITION SPECIFICATION
ACCEL SEN 1
ACCEL SEN 2(1)
  • Ignition switch: ON
(Engine stopped)		 Accelerator pedal: Fully released 0.4 - 1.1 V
Accelerator pedal: Fully depressed 3.7 - 4.8 V
CLSD THL POS
  • Ignition switch: ON
(Engine stopped)		 Accelerator pedal: Fully released ON
Accelerator pedal: Slightly depressed OFF
(1) Accelerator pedal position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminal voltage.
scientia non olet · About LEMON Manuals