LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Engine Control System - Introduction) >> Service Information >> Trouble Diagnosis - Specification Value >> Inspection Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Procedure

WARNING: This page is about a different car, the 2010 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Perform "SPEC" of "DATA MONITOR" mode in maximum scale display.
  1. Perform "BASIC INSPECTION ".
  2. Check that the testing conditions are met. Refer to "TESTING CONDITION ".
  3. Select "B/FUEL SCHDL", "A/F ALPHA-B1", "A/F ALPHA-B2" and "MAS A/F SE-B1" in "SPEC" of "DATA MONITOR" mode with CONSULT-III.
  4. Check that monitor items are within the SP value.
  5. If NG, go to "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals