Push-Button Ignition Switch Illumination Control (With Intelligent Key)

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

Push-button Ignition Switch Illumination Basic Operation

BCM provides the power supply to turn the push-button ignition switch illumination ON.

Push-button Ignition Switch Illumination ON Operation

BCM turns the push-button ignition switch illumination ON in the following conditions.

Ignition switch ON
Any of the following conditions with ignition switch OFF/ACC
- Engine start permission is entered
- Driver side door is LOCK? UNLOCK
- Driver side door is open

Push-button Ignition Switch Illumination OFF Operation

BCM turns the push-button ignition switch illumination OFF in any of the following conditions.

The push-button ignition switch illumination ON conditions do not satisfy.
Any of the following conditions with ignition switch OFF.
- The push-button ignition switch illumination ON conditions do not change (15 seconds after the ignition switch OFF)
- Driver side door is UNLOCK? LOCK