July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Diagnosis Procedure

CHECK PRE-CRASH-SEAT BELT CONTROL UNIT (PASSENGER SIDE)
Check pre-crash seat belt control unit (passenger side) power supply. Refer to DIAGNOSIS PROCEDURE .

Is the inspection result normal?

YES: GO TO 2.

NO: Repair or replace harness between pre-crash seat belt control unit (passenger side) connector and fusible link.

CHECK LOCAL COMMUNICATION LINE CIRCUIT

Turn ignition switch OFF.
Disconnect pre-crash seat belt control unit (driver side and passenger side) connector.

Check continuity between local communication line harness connector.

CONTINUITY TABLE

Pre-crash seat belt control unit (driver side)		Pre-crash seat belt control unit (passenger side)		Continuity
Connector	Terminal	Connector	Terminal	Continuity
B9	8	B211	8	Existed
B9	16	B211	16	Existed

Check continuity between pre-crash seat belt control unit (driver side) harness connector and ground.

CONTINUITY TABLE

Pre-crash seat belt control unit (driver side)		Ground	Continuity
Connector	Terminal
B9	8		Not existed
	16

Is the inspection result normal?

YES: GO TO 3.

NO: Repair or replace local communication line.

REPLACE PRE-CRASH SEAT BELT CONTROL UNIT (PASSENGER SIDE)
1. Replace pre-crash seat belt control unit (passenger side)
2. Check "Self-diagnostic result" with CONSULT-III.
Is DTC detected?

YES: GO TO 4.

NO: INSPECTION END
REPLACE PRE-CRASH SEAT BELT CONTROL UNIT (DRIVER SIDE)
1. Replace pre-crash seat belt control unit (driver side)
2. Check "Self-diagnostic result" with CONSULT-III.
Is DTC detected?

YES: GO TO 5.

NO: INSPECTION END
CHECK INTERMITTENT INCIDENT
Refer to INTERMITTENT INCIDENT .

INSPECTION END