September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC Confirmation Procedure
- If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Select "DATA MONITOR" mode with CONSULT-III.
- Maintain the following conditions for at least 10 seconds.
ENGINE OPERATING CONDITIONS
| ENG SPEED |
More than idle speed |
| Selector lever |
P or N position |
- Check 1st trip DTC.
- If 1st trip DTC is detected, go to
"DIAGNOSIS PROCEDURE ".