DTC Check/Clear

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON and turn the Techstream ON.
3. Enter the following menus:
  Techstream - Select: Body Electrical / Main Body / Trouble Codes.
4. Check DTCs.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
5. Confirm the details of the DTCs (see DIAGNOSTIC TROUBLE CODE CHART ).
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON and turn the Techstream ON.
3. Enter the following menus:
  Techstream - Select: Body Electrical / Main Body / Trouble Codes.
4. Erase DTCs.
  HINT:
  
  Refer to the Techstream operator's manual for further details.