LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> QX56 RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Component Testing >> On-Vehicle Repair >> Intake Valve Timing Control >> Intake Valve Timing Control Position Sensor (LH) >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Intake Valve Timing Control Position Sensor (LH): Removal

  1. Remove engine room cover using power tool. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove air duct and resonator assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect intake valve timing control position sensor connector (LH).
  4. Remove intake valve timing control position sensor (LH) (1) from Intake valve timing control solenoid valve cover (LH) (3).
    Fig 1: Identifying Intake Valve Timing Control Position Sensor (LH) Remove/Install Components
    G05378612Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals