LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M35 x >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VQ35DE) - DTCS P0137 To P0448 >> DTC P0340, P0345: CMP Sensor (Phase) >> DTC Confirmation Procedure >> Testing Condition
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Testing Condition

Before performing the following procedure, confirm that battery voltage is more than 10.5V with ignition switch ON  .

  1. Crank engine for at least 2 seconds and run it for at least 5 seconds at idle speed.
  2. Check 1st trip DTC.
  3. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

    If 1st trip DTC is not detected, go to next step.

  4. Maintaining engine speed at more than 800 RPM for at least 5 seconds.
  5. Check 1st trip DTC.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".