LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Transfer Case) >> Precaution >> Precautions >> Precaution for Transfer Assembly and Transfer Control Unit Replacement >> Method For Adjustment With 4WD Shift Switch At 4H Or 4LO
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Method For Adjustment With 4WD Shift Switch At 4H Or 4LO

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine. Run the engine for at least 10 seconds.
  2. Stop vehicle and move A/T selector lever to N position with brake pedal depressed. Stay in N for at least 2 seconds.)
  3. Turn 4WD shift switch to 2WD position. Stay in 2WD for at least 2 seconds.
  4. Turn ignition switch OFF.
  5. Start engine.
  6. Erase self-diagnosis. Refer to , "CONSULT-III FUNCTION (ALL MODE AWD/4WD) ".
  7. Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to CHECK 4WD SHIFT INDICATOR PATTERN .

    If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.

scientia non olet · About LEMON Manuals