October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Function Check

CHECK FUNCTION

Select "DETENT SW" signal in "Data Monitor" mode with CONSULT-III.

Check detention switch signal under the following conditions.

MONITOR ITEM STATUS REFERENCE

Monitor item	Condition		Status
DETENT SW	A/T selector lever	P position	OFF
DETENT SW	A/T selector lever	Other than above	ON

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".