October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Accelerator Pedal Position Sensor
- Reconnect all harness connectors disconnected.
- Turn ignition switch ON.
- Check voltage between ECM terminals 106 (APP sensor 1 signal), 98 (APP sensor 2 signal) and ground under the following conditions.
TERMINALS VOLTAGE CHART
| Terminal |
Accelerator pedal |
Voltage |
| 106 (Accelerator pedal position sensor 1) |
Fully released |
0.5 - 1.0V |
| Fully depressed |
4.2 - 4.8V |
| 98 (Accelerator pedal position sensor 2) |
Fully released |
0.25 - 0.5V |
| Fully depressed |
2.0 - 2.5V |
Courtesy of NISSAN NORTH AMERICA, INC.
- If NG, replace accelerator pedal assembly and go to next step.
- Perform
"ACCELERATOR PEDAL RELEASED POSITION LEARNING
".
- Perform
"THROTTLE VALVE CLOSED POSITION LEARNING
".
- Perform
"IDLE AIR VOLUME LEARNING
".