Inspection Procedure

1. Turn ignition switch OFF and disconnect parking brake switch connector E110.
2. Check continuity between parking brake switch connector E110 and ground.
   CONTINUITY SPECIFICATION
   
   

   Condition	Continuity
   When the parking brake pedal is operated	Yes
   When the parking brake pedal is not operated	No

   Fig 1: Checking Continuity Between Parking Brake Switch Connector E110 And Ground

   

OK or NG 

OK: GO TO 2.

NG: Parking brake switch is malfunctioning. Replace parking brake switch.

1. Disconnect ABS actuator and electric unit (control unit) connector E30.
2. Check continuity between parking brake switch connector E110 and ABS actuator and electric unit (control unit) connector E30.
   CONTINUITY SPECIFICATION
   
   

   ABS actuator and electric unit (control unit)	Parking brake switch	Continuity
   36	1	Yes
   	Ground	No

   Fig 2: Checking Continuity Between Parking Brake Switch Connector E110 And ABS Actuator And Electric Unit Connector

   

OK or NG 

OK: INSPECTION END

NG: Repair or replace malfunctioning components.