LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2007 >> FX35 AWD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System (VQ35DE) - Component And System Testing >> ICC Brake Switch >> Component Inspection >> ICC Brake Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ICC Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ICC brake switch harness connector.
  3. Check continuity between ICC brake switch terminals 1 and 2 under the following conditions.
CONTINUITY REFERENCE

Condition Continuity
Brake pedal: Fully released Should exist.
Brake pedal: Slightly depressed Should not exist.

If NG, adjust ICC brake switch installation, refer to "BRAKE PEDAL ", and perform step  3 again.

Fig 1: Checking Continuity Between ICC Brake Switch Terminals 1 And 2
G04895072Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals