September 30: LEMON manuals is back up on a temporary server! Slowness is possible
With CONSULT-II
- Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
- Start engine and warm it up to the normal operating temperature.
- Turn ignition switch OFF and wait at least 10 seconds.
- Start engine and keep the engine speed between 3, 500 and 4, 000 RPM for at least 1 minute under no load.
- Let engine idle for 2 minutes.
- If 1st trip DTC is detected, go to
"PROCEDURE FOR MALFUNCTION A ".
Courtesy of NISSAN MOTOR CO., U.S.A.