October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ECM Inspection Table

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: ECM Specification Data (1 Of 8)

G02384838

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Specification Data (2 Of 8)

G02384839

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Specification Data (3 Of 8)

G02384840

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: ECM Specification Data (4 Of 8)

G02384841

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Specification Data (5 Of 8)

G02384842

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Specification Data (6 Of 8)

G02384843

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Specification Data (7 Of 8)

G02384844

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Specification Data (8 Of 8)

G02384845

Courtesy of NISSAN MOTOR CO., U.S.A.