LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2005 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0340: CMP Sensor (Phase) >> Component Inspection >> Camshaft Position Sensor (Phase)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor (Phase)

  1. Loosen the fixing bolt of the sensor.
  2. Disconnect camshaft position sensor (PHASE) harness connector.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
    Fig 1: Visually Checking Camshaft Position Sensor (PHASE) For Chipping
    G02388846Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check resistance as shown in the figure.
    Fig 2: Camshaft Position Sensor (PHASE) Terminals Resistance Specification
    G02388847Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 3: Camshaft Position Sensor (PHASE) Terminals Resistance
    G02388848Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals