LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2005 >> QX56 AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> G Sensor >> Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation: Removal

  1. Remove center console. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove yaw rate/side/decel G sensor attaching nuts.
    CAUTION:
    • Do not use power tools to remove or install yaw rate/side/decel G sensor.
    • Do not drop or strike the yaw rate/side/decel G sensor.
  3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.
    Fig 1: G Sensor Attaching Nuts With Torque Specifications
    G02385063Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals