LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2005 >> G35 x >> Repair and Diagnosis >> Engine Performance >> Engine Control System - Sedan >> Electrical Load Signal >> Diagnostic Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Diagnostic Procedure

  1. CHECK LOAD SIGNAL CIRCUIT OVERALL FUNCTION-I 
    1. Turn ignition switch ON.
    2. Connect CONSULT-II and select "DATA MONITOR" mode.
    3. Select "LOAD SIGNAL" and check indication under the following conditions.
      CHECK

      Condition Indication
      Rear window defogger switch: ON ON
      Rear window defogger switch: OFF OFF
      Fig 1: Data Monitor Display
      G02349153Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    1. OK: GO TO 2.
    2. NG: GO TO  3.
  2. CHECK LOAD SIGNAL CIRCUIT OVERALL FUNCTION-II 

    Check "LOAD SIGNAL" indication under the following conditions.

    CHECK

    Condition Indication
    Lighting switch: ON at 2nd position ON
    Lighting switch: OFF OFF
    Fig 2: Data Monitor Display (Load Signal)
    G02349154Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    1. OK: INSPECTION END 
    2. NG: GO TO  4.
  3. CHECK REAR WINDOW DEFOGGER SYSTEM 

    Refer to "REAR WINDOW DEFOGGER ".

    1. : INSPECTION END 
  4. CHECK HEADLAMP SYSTEM 

    Refer to "HEADLAMP (FOR USA) " or "HEADLAMP (FOR CANADA) - DAYTIME LIGHT SYSTEM ".

    1. : INSPECTION END 
scientia non olet · About LEMON Manuals