LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2005 >> FX35 RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System - VQ35DE >> Electrical Load Signal >> Diagnostic Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Diagnostic Procedure

  1. CHECK LOAD SIGNAL CIRCUIT OVERALL FUNCTION-I 
    1. Turn ignition switch ON.
    2. Connect CONSULT-II and select "DATA MONITOR" mode.
    3. Select "LOAD SIGNAL" and check indication under the following conditions.
      Fig 1: Identifying CONSULT-II Display Screen Data Monitor
      G02361148Courtesy of NISSAN MOTOR CO., U.S.A.
    LOAD SIGNAL CONDITION

    Condition Indication
    Rear window defogger switch: ON ON
    Rear window defogger switch: OFF OFF

    OK or NG

    1. OK: GO TO 2.
    2. NG: GO TO  3 .
  2. CHECK LOAD SIGNAL CIRCUIT OVERALL FUNCTION-II 

    Check "LOAD SIGNAL" indication under the following conditions.

    LOAD SIGNAL CONDITION

    Condition Indication
    Lighting switch: ON at 2nd position ON
    Lighting switch: OFF OFF

    OK or NG

    1. OK: INSPECTION END 
    2. NG: GO TO  4 .
    Fig 2: Identifying CONSULT-II Display Screen Data Monitor
    G02361149Courtesy of NISSAN MOTOR CO., U.S.A.
  3. CHECK REAR WINDOW DEFOGGER SYSTEM 

    Refer to "REAR WINDOW DEFOGGER ".

    1. : INSPECTION END 
  4. CHECK HEADLAMP SYSTEM 

    Refer to "HEADLAMP -- XENON TYPE - "

    1. : INSPECTION END 
scientia non olet · About LEMON Manuals