LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> 2004 - Engine Control System - Coupe >> ASCD Brake Switch >> Diagnostic Procedure >> M/T Models >> 4. Check ASCD Brake Switch Power Supply Circuit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

4. Check ASCD Brake Switch Power Supply Circuit

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector. See Figure.
  3. Turn ignition switch ON.
  4. Check voltage between ASCD brake switch terminal 1 and ground with CONSULT-II or tester.
    1. Voltage: Battery voltage 

OK or NG 

OK: GO TO 6 .

NG: GO TO 5.

Fig 1: Checking Power Supply Circuit
G00720492Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals