LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> FX35 AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P1031, P1032, P1051 & P1052 A/F Sensor 1 Heater >> DTC Confirmation Procedure >> Testing Condition
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Testing Condition

Before performing the following procedure, confirm that battery voltage is between 10.5V and 16V at idle  .

With CONSULT-II 

  1. Turn ignition switch ON and select DATA MONITOR mode with CONSULT-II. See Figure.
  2. Start engine and let it idle for at least 10 seconds.
  3. If 1st trip DTC is detected, Go to DIAGNOSTIC PROCEDURE .

With GST 

Follow the procedure with CONSULT-II above.

scientia non olet · About LEMON Manuals