July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Check Key Fob Battery and Function

WARNING: This page is about a different variant/trim than selected.

CHECK KEY FOB BATTERY
1. Remove key fob battery. Refer to "KEY FOB BATTERY REPLACEMENT ".
2. Measure voltage between battery positive and negative terminals, (+) and (-).
  1. Voltage: 2.5V - 3.0V
  NOTE: Key fob does not function if battery is not set correctly.
Fig 1: Measuring Voltage Between Battery Positive And Negative Terminals
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG
1. OK : GO TO 2
2. NG : Replace battery.
Fig 2: Checking Key Fob Function In "DATA MONITOR" Mode With CONSULT-II
Courtesy of NISSAN MOTOR CO., U.S.A.
CHECK KEY FOB FUNCTION
With CONSULT-II

Check key fob function in "DATA MONITOR" mode with CONSULT-II.

When pushing each button of key fob, the corresponding monitor item should be turned as follows.

Fig 3: CONSULT-II DATA MONITOR Screen
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG
1. OK : Key fob is OK.
2. NG : Replace key fob.