October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
DTC Confirmation Test (With CONSULT-II)
- Start engine and warm it up to normal operating temperature.
- Turn ignition switch off and wait at least 10 seconds.
- Turn ignition switch on and select DATA MONITOR mode.
- Ensure that FUEL T/TEMP SE is more than 32°F (0°C).
- Start engine and wait at least 20 seconds. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE
. If 1st trip DTC is not detected, system is okay at this time.