October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Condenser (Q45)

Turn ignition off. Disconnect condenser harness connector F23 (Gray, 2-pin), located at rear of engine compartment. See Fig 1. Measure resistance between condenser terminals. Resistance should be more than one megohm at 77°F (25°C). If resistance is as specified, condenser is okay. If resistance is not as specified, replace condenser.

Fig 1: Identifying Engine Control Harness Routing (Q45)

Courtesy of NISSAN MOTOR CO., U.S.A.