All Items, Main Items, Select Item Menu

ALL ITEMS, MAIN ITEMS, SELECT ITEM MENU

Item name	CONSULT-II screen display	Display or unit	Monitor item selection			Description
Item name	CONSULT-II screen display	Display or unit	ALL SIGNALS	MAIN SIGNALS	SELECT FROM MENU	Description
Motor fan request	MOTOR FAN REQ	1/2/3/4	x	x	x	Signal status input from ECM
Compressor request	AC COMP REQ	ON/OFF	x	x	x	Signal status input from ECM
Tail & clear request	TAIL & CLR REQ	ON/OFF	x	x	x	Signal status input from BCM
H/L LO request	HL LO REQ	ON/OFF	x	x	x	Signal status input from BCM
H/L HI request	HL HI REQ	ON/OFF	x	x	x	Signal status input from BCM
FR fog request	FR FOG REQ	ON/OFF	x	x	x	Signal status input from BCM
FR wiper request	FR WIP REQ	STOP/1 LO/LO/HI	x	x	x	Signal status input from BCM
Wiper auto stop	WIP AUTO STOP	ACT P/STOP P	x	x	x	Output status of IPDM E/R
Wiper protection	WIP PROT	OFF/LS/HS/Block	x	x	x	Control status of IPDM E/R
Starter request	ST RLY REQ	ON/OFF	x		x	Status of input signal ^NOTE
Ignition relay status	IGN RLY	ON/OFF	x	x	x	Ignition relay status monitored with IPDM E/R
Rear window defogger request	RR DEF REQ	ON/OFF	x	x	x	Signal status input from BCM
Oil pressure switch	OIL P SW	OPEN/CLOSE	x		x	Signal status input in IPDM E/R
Hood switch	HOOD SW	ON/OFF	x		x	Input signal status
Theft warning horn request	THFT HRN REQ	ON/OFF	x		x	Signal status input from BCM
Horn chirp	HORN CHIRP	ON/OFF	x		x	Output status of IPDM E/R
Cornering lamp request^NOTE	CRNRNG LMP REQ	OFF/LEFT/RIGHT	x		x	Signal status input from BCM

NOTE:

Perform monitoring of IPDM E/R data with the ignition switch ON. When the ignition switch is at ACC, the display may not be correct.
The vehicle without the Intelligent Key system displays only ON without change.
The cornering lamp items are displayed, but they cannot be monitored.