LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2003 >> FX35 AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Disassembly And Assembly >> Assembly >> Front Case
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Case

  1. Install the main shaft bearing into front case.
  2. Install the snap ring into front case.
    CAUTION: Do not reuse snap ring.
    Fig 1: Installing Snap Ring Into Front Case
    G03106437Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Using a drift, install the front oil seal into front case.

    Tool number: ST27862000 (-) 

    CAUTION:
    • Discard old oil seals; replace with new ones.
    • Apply multi-purpose grease onto oil seal lips, and gear oil onto the circumference of the oil seal.
      Fig 2: Installing Oil Seal Into Front Case
      G03106438Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Using a drift, install the main shaft oil seal into front case.

    Tool number :ST30613000(-) 

    CAUTION:
    • Discard old oil seals; replace with new ones.
    • Apply multi-purpose grease onto oil seal lips, and gear oil onto the circumference of the oil seal.
      Fig 3: Installing Main Shaft Oil Seal Into Front Case
      G03106439Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals