October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

3. Check EVAP Control System Pressure Sensor Power Supply Circuit

WARNING: This page is about a different car, the 2004 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch ON.
Check voltage between EVAP control system pressure sensor terminal 1 and ground with CONSULT-II or tester. See Figure.
1. Voltage: Approximately 5V

OK or NG

OK : GO TO 5.

NG : GO TO 4.