Active Test: Notes
WARNING: This page is about a different car, the 2004 Infiniti Q45 and 2003 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not perform the active test while driving.
- Active test cannot be started while ICC system warning indicator illuminates.
- Turn ignition switch OFF.
- Connect CONSULT-II and CONSULT-II CONVERTER to data link connector and start engine.
- Touch "START", "ICC", and "ACTIVE TEST" on CONSULT-II display in turn.
If "ICC" is not indicated, go to CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT .
- Touch necessary test item.
- Touch "START".
- Active test screen will be shown.