LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2002 >> I35 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generators & Regulators >> Bench Testing >> Diodes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Bench Testing: Diodes

NOTE: Separate stator and diode assembly by unsoldering connecting wires. Use just enough heat to melt solder. Excessive heat will damage diodes.

Using DVOM, connect positive lead to positive diode plate, and negative lead to any diode terminal. Reverse test leads. Continuity should exist in only one direction. Repeat test procedure for each remaining diode. If continuity exists in both directions, or continuity does not exist in either direction, replace entire diode assembly.

scientia non olet · About LEMON Manuals