September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Power Window Sub-Switch
- Unplug harness connector from switch. Using a DVOM, ensure continuity is present between terminals No. 32 and 35 with switch in up position. See Fig 1
. Continuity should not be present with switch in down position.
- Ensure continuity is present between terminals No. 35 and 36 with switch in down position. See Fig 1
. Continuity should not be present with switch in up position. Replace switch if continuity is not as specified.
Courtesy of NISSAN MOTOR CO., U.S.A.